Set Alarm Time; Deactivate/Activate Alarm - La Crosse Technology WS-5220U-IT Instruction Manual

1. Hold AL/HOUR to enter AL/HOUR set mode.
2. Press AL/HOUR to adjust the hour and MODE/MIN to
adjust the minutes.
3. Press SNOOZE to confirm adjustments and exit.
Setting order: 1. Hour, 2. Minutes
Press SNOOZE to exit, or wait 30 seconds without pressing
buttons to return to the normal time display.
 Press AL/HOUR once to deactivate the alarm.
 The alarm icon will disappear.
 Press AL/HOUR once to activate the alarm.
 The alarm icon will appear.
 Press SNOOZE to silence an active alarm for 5 minutes.
 The alarm icon will flash.
 Press any button except snooze, to stop the alarm for 24
hours.
Projection (Brightness, Rotation)
When operating on AC power, the clock will project the time
and outdoor temperature, alternating every 5 seconds.
Note: The projection may be turned off but the alternating time
and temperature cannot be adjusted to just time or just
temperature projected.
Brightness Adjustment (AC power):
Press the Brightness (sun) button to change the projection:
 High
 Medium
 Low
 OFF
Rotate Projection:
Press the Projection Direction button to rotate the projected
image 90 degrees at a time.
WT-5220U-IT

Set Alarm Time

Deactivate/Activate Alarm

Snooze
www.lacrossetechnology.com/support
Brightness Projection
Direction
Page | 3
Alarm
Icon