Advertisement
Step 1: Insert 2 fresh AA, Alkaline batteries into the TX37U-IT
sensor according to polarity markings.
Step 2: Insert the 6 volt AC power cord into the wall, then into
the back of the alarm clock.
Step 3: Insert 3 fresh AA, Alkaline batteries into the projection
clock according to polarity (optional).
Restart: If the outdoor temperature is not displayed after 3
minutes, remove batteries from the projection clock and
outdoor sensor. Press any button on the projection clock 20
times. After 15 minutes, return to Step 1 above.
Set Time, Date, 12/24 Hour, Temperature Units
1. Hold the MODE/MIN button to enter time set mode
2. Press the SNOOZE button to confirm adjustments and
move to next item.
3. Press the AL/HOUR or MODE/MIN button to adjust
values.
Note:
When setting time (hours and minutes flash together):
Use the AL/HOUR button to set the hour.
o
Use the MODE/MIN button to set the minutes.
o
When setting the calendar (month and date flash together):
Use the AL/HOUR button to set the month.
o
Use the MODE/MIN button to set the date.
o
Setting order:
1. Time Zone
2. Hour & Minutes (together)
3. Year
4. Month/Date (together)
5. 12/24 Hour Format
6. Fahrenheit/Celsius
7. Daylight Saving Time ON/OFF
Press SNOOZE to exit, or wait 30 seconds without pressing
buttons to return to the normal time display.
WT-5220U-IT
Get Started
www.lacrossetechnology.com/support
This clock has time zones
from GMT 0 to +/-12h
North American time zones:
-4 h - Atlantic
-5 h - Eastern (default)
-6 h - Central
-7 h - Mountain
-8 h -
Pacific
-9 h – Alaska
-10 h -Hawaiian
Page | 2
Advertisement
