Option
Description
Image Shift
Corrects the Image on your LCD projection TV.
Before adjusting
After adjusting
Auto
Level 1-4
i.LINK Standby
On
Off
High Altitude
Off
On
Using the Menus
(Factory setting) Automatically
corrects double images.
Select the value with which double
images are improved.
Allows the i.LINK signal to pass
through to connected i.LINK devices
even when the LCD projection TV is
turned off. The front panel
i.STANDBY (i.LINK standby) LED
lights in red. The LCD projection TV
uses more standby power than when
this option is set to Off.
Does not allow the i.LINK signal to
pass through to connected i.LINK
devices when the LCD projection TV
is turned off. The front panel
i.STANDBY (i.LINK Standby) LED
turns off. The LCD projection TV
uses less standby power than when
this option is set to On.
Select to use the LCD projection TV
at normal altitude.
Select to use the LCD projection TV
at an altitude of 1,500 m or higher.
105