JVC KD-SX950 Service Manual page 5

Removing the CD mechanism control
board(See Fig.1 and 2)
Unsolder the part f and g on the CD mechanism
control board.
Remove the stator fixing the CD mechanism control
board and the damper bracket (To remove the stator
smoothly, pick up the center part).
Remove the screw F attaching the CD mechanism
control board.
Remove the CD mechanism control board in the
direction of the arrow while releasing it from the two
damper bracket slots i and the front bracket slot j.
Disconnect the flexible wire from connector on the
pickup unit.
ATTENTION: Turn the FD gear in the direction of the
arrow to move the entire pickup unit to
the appropriate position where the
flexible wire of the CD mechanism unit
can be disconnected easily (Refer to
Fig.2).
I
CD mechanism ass'y
m
Front bracket
FD gear
CD mechanism control board
k
G
Loading motor
Pull outward
Flame
Damper bracket
I
f
j
F
g
Fig.1
Pickup unit
Flexible wire
Fig.2
k
G
Front bracket
Fig.3
Front bracket
Fig.4
m
h
I
i
CD mechanism
control board
Shift the lock
Pull outward