Toshiba 32W300Ps Operating Instructions Manual page 35

5. Connecting to a DVD player or other AV device with Component Video outputs
TV (Left side view)
If your DVD player (or other device) has Component Video output jacks, use a suitable set of cables
(RCA/Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance
the picture quality and performance. Please remember that you will also need to connect separate cables
(RCA/Phono) for the audio signals. Select the COMPONENT input mode (see page 11).
Note:
The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL:
576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).
6. Setting of Scart socket
1
Press MENU, the menu will appear on the screen. Press
or to select AV1 INPUT or AV2 INPUT, then press ENTER.
2
Press or
AV: Composite signal (e.g. from VHS-Video recorder).
RGB: RGB signal (e.g. from DVD player with RGB output).
S-VIDEO: S-Video signal (e.g. from DVD player with S-Video output).
Note:
When S-VIDEO is selected, the image will not be outputted from
(AV2) SCART socket. Only the sound will be outputted.
3
Press EXIT to return to the normal screen.
32L0141B_Eng.indd 35 32L0141B_Eng.indd 35
Connection to other equipment
Video cable (not supplied)
To COMPONENT IN
(1) (AV1)/
to select AV, RGB or S-VIDEO.
Audio cable (not supplied)
Component output
(2) (AV2)
or to select
(2)
Y Pb Pr
Audio output
DVD player
(SETUP) menu. Press
AV1 INPUT AV
AV2 INPUT AV
AV COLOUR
AUTO
RESET TV SETTING
AV
EXIT : END MENU: RETURN
6/7/2007 9:21:22 AM 6/7/2007 9:21:22 AM
E
35