Canon EOS 80D Instruction Manual page 76

Connecting to a Detected Network Manually
Send To Screen
When [m] is selected in [Wi-Fi function], a screen to select a
destination may be displayed depending on the type or settings of the
Web service you select.
To register destinations or to specify the settings, you must use a
computer. For more information, refer to the EOS Utility Instruction
Manual.
Camera Access Point Mode
76
When [m] (Email) or other service is

selected on the [Upload to Web
service] screen, the [Send to] screen
may be displayed.
Select the destination from the list of

registered destinations and press <0>.
The procedures for setting up a

connection and sending images are
the same as those for other Web
services.
Camera access point mode is a
connection mode for connecting the
camera directly to each device.
Displayed when [q], [D], or [l] is
selected in [Wi-Fi function].
In camera access point mode, the
following two connection methods are
available.
[Easy connection]: See "Easy

Connection" (p.25) to establish a
connection.
[Manual connection]: See page 164

to establish a connection.