Canon EOS 80D Instruction Manual page 109

Terminating the Connection
When the wireless connection is terminated while recording a movie with

remote shooting, the camera responds as follows:
• When the Live View shooting/Movie shooting switch is set to <k>,
movie shooting continues.
• When the Live View shooting/Movie shooting switch is set to <A>,
movie shooting stops.
When the Live View shooting/Movie shooting switch is set to <A> and

the movie mode is set using EOS utility, you cannot shoot by operating
the camera.
When the camera is connected to EOS Utility, the following operations

cannot be performed:
Multiple exposures, video snapshot, time-lapse movie, Creative filters,
RAW image processing, cropping, resize
In remote shooting, the AF speed may become slower.

Depending on the connection status, image display may become slower

or shutter release may be delayed than usual.
In Remote Live View shooting, the rate of image transmission is slower

compared to a connection via an interface cable. Therefore, moving
subjects cannot be displayed smoothly.
The wireless connection will stop if you set the camera's power to <2>
or open the card slot cover or battery compartment cover.
On the [DWi-Fi on] screen,
select [Disconnect,exit].
If the [DWi-Fi on] screen is not

displayed, select the [51] tab 9
[Wireless communication settings]
9 [Wi-Fi function].
Select [Disconnect,exit], then select

[OK] on the confirmation dialog to
terminate the connection.
Using EOS Utility
109