EXTERIOR LIGHTING AND SIGNALS
1
2
3
Side lights
u
Turn the ring 2 until the symbol
is opposite mark 3. This indicator light
on the instrument panel comes on.
1.68
(1/3)
Dipped beam
k
headlights
Manual operation
Turn the ring 2 until the symbol is oppo-
site mark 3. This indicator light on the
instrument panel comes on.
Automatic operation
(depending on vehicle)
Turn ring 2 until the AUTO symbol is op-
posite mark 3: with the engine running,
the dipped beam headlights switch on
or off automatically depending on the
brightness of the light outside, without
any action on stalk 1.
Daytime running lights
1
function
Depending on the vehicle, the daytime
running lights come on automatically
when the engine is started.
Main beam headlights
á
With the dipped beam head-
lights lit, pull stalk 1 towards you. This
indicator light on the instrument panel
comes on.
To return to the dipped headlight posi-
tion, pull stalk 1 towards you again.
Before driving at night,
check that the electrical
equipment is operating cor-
rectly and adjust the head-
light beams (if your vehicle is not
carrying its normal load). As a gen-
eral precaution, check that the lights
are not obscured (by dirt, mud,
snow or objects being transported).