Motorola V186 Owner's Manual page 24

entry mode
j or g
Your Primary text entry mode can be set to any
iTAP® j or tap g mode.
p or m
Your Secondary text entry mode can be set to any
iTAP p or tap m mode, or set to None if you don't
want a secondary entry mode.
Numeric mode enters numbers only.
è
[
Symbol mode enters symbols only.
To set your primary and secondary text entry modes, press
M > Entry Setup in a text entry screen and select Primary Setup or
Secondary Setup.
Tip: WANT TO SHOUT YOUR MESSAGE? Press 0 in a text
entry screen to change text case to no capital letters (í),
next letter capital (ì with k, n, h, or q), or all capitals
(L with i, o, f, or l).
iTAP® mode
Press # in a text entry screen to switch to iTAP mode. If
you don't see j or p, press M > Entry Setup to set iTAP mode
as your primary or secondary text entry mode.
iTAP mode lets you enter words using one keypress per
letter. The iTAP software combines your keypresses into
common words, and predicts each word as you enter it.
22 basics