Sony BM-21 Service Manual page 33

1-5. MECHANISM DECK (MB-23-101)
3 two screws (M1.4 × 3.0)
lock plate assembly
shaft-A
4 mechanism deck
(MB-23-101)
1-6. HOLDER PANEL ASSEMBLY
2 Move the battery coil spring in the direction
of the arrow and secure it with the screw.
A
claw
A
1 While pressing the button (eject), insert
the two claws of the holder panel assembly
into the holes indicated by arrows A .
1 Remove the soldering.
2 Set the holder panel
assembly to eject.
note : When attaching the mechanism deck,
set the mechanism deck to stop and
adjust the position of shaft-A and part
A of the lock plate assembly.
4 holder panel assembly
claw
BM-21/23
A
3 two screws (M1.4 × 1.6)
7