Chassis Enclosure And Ventilation Requirements; Regulatory Compliance And Environmental - Dell OPTIPLEX XE Series Technical Manualbook

DELL™ OPTIPLEX™ XE TECHNICAL GUIDEBOOK V1.0
C HASS IS E NC LOS URE & VENTI LAT ION RE QUIREME NTS
ENCLOSURE VENTILATION
If your enclosure has doors, they need to be of a type that allows at least 30% airflow through
the enclosure (front and back).
ENCLOSURE MINIMUM CLEARANCE
Leave a 10.2 cm (4 in.) minimum clearance on all vented sides of the computer to permit the
airflow required for proper ventilation.
RECOMMENDED ENCLOSURE
Do not install your computer in an enclosure that does not allow airflow. This restricts the
airflow and impacts your computer's performance, possibly causing it to overheat.
OPEN DESK MINIMUM CLEARANCE
If your computer is installed in a corner, on a desk, or under a desk, leave at least 5.1 cm (2 in.)
clearance from the back of the computer to the wall to permit the airflow required for proper
ventilation.

REGULATORY COMPLIANCE AND ENVIRONMENTAL

Product related conformity assessment and regulatory authorizations including Product Safety, Electromagnetic Compatibility (EMC),
Ergonomics, Communication Devices relevant to this product, along with additional product related conformity assessment, and
information encompassing Environmental, Energy Consumption, Noise Emissions, Product Materials Information, Packaging,
Batteries, and Recycling relevant to this product may be viewed in the Regulatory and Environmental Datasheet for this product is
located at:
http://www.dell.com/content/topics/global.aspx/about_dell/values/regulatory_compliance/dec_conform?
c=us&l=en&s=corp&~ck=anavml
Details of Dell's environmental stewardship program to conserve product energy consumption, reduce or eliminate materials for
disposal, prolong product life span and provide effective and convenient equipment recovery solutions may be viewed at
www.dell.com/earth by clicking the Design for Environment link on the webpage.
32