WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the keyboard cable into the system-board connector and close the latch
to secure the cable.
2
Carefully turn the keyboard over, slide the tabs on the keyboard into the slots
on the palm-rest assembly, and snap the keyboard into place.
3
Close the display and turn the computer over.
Post-requisites
Replace the battery.
Replacing the keyboard
computer. After working inside your computer,
After working inside your
computer. For more
Replacing the keyboard
8
23