If you wish to save to that location, thus overwriting and erasing the
old information, press Ø.
If you wish to store the entry in an alternate location, press ´,
Ø and the alternate location number.
1. Press ‰ and the two-digit location number so that the num-
ber to be changed is displayed.
2. Press and release Ç to back out each of the digits dis -
played.
3. Enter the new number.
4. Press Ø and the two-digit location. The location number
and FULL will display. The display will then alternate
between the previously stored number and CHANGE?.
5. Press Ø to save the new information to this location.
1. Press and hold Ç.
2. Press Ø.
3. Enter the two-digit location number to be cleared.
The display will alternate between the previously stored
number and CHANGE?.
4. Press Ø to clear the memory location.
R e c a l l i n g F r o m M e m o r y
1. Press ‰.
2. Enter the two-digit location number (01, 02, etc.) The display
shows the location number, then the last 10 digits of its number.
3. Press ‰ to review the complete number.
Memory Scrolling allows you to review your memory locations
sequentially, beginning with the location of your choice. This is
MEMORY
C h a n g i n g E n t r i e s
C l e a r i n g E n t r i e s
M e m o r y S c r o l l i n g