Placing And Ending Calls - Motorola MicroTAC SC-725 Owner's Manual

Placing and Ending Calls

First check that your phone is ON.
To place a call:
1. Extend the antenna completely for
best performance.
2. Open keypad cover to expose the keypad.
3. Enter the number you want to call,
for example: 555-1234.
Ç
Press
make a mistake.
Ç
Hold
æ
4. Press
You will see: Dialing 555-1234.
or
Press & hold Smart Button until you hear a
high tone. You will see: Dialing 555-1234.
You can dial phone numbers with up to 32 digits, but only the last
twenty-four digits will appear in the display.
‰
Press
Your phone will display the first 24 digits, then a second screen
will show the remaining digits in the phone number.
To end a call:
Close keypad cover to hang up your phone.
or
º
Press
or
Press & hold Smart Button until you hear a
high tone. You will see: Press § to End Call.
then
Press Smart Button again to end the call.
to erase one digit at a time if you
to erase the entire entry.
to place the call.
to see the rest of the number.
.
Placing a Call
Ending a Call
29