Creating A Stereo Pair - Sonos CONTROL Product Manual

SONOS CONTROL
Turning Off the Status Light
A constant white light displays above the volume controls on Sonos players to indicate that the unit is functioning in normal
operation. If you have a Sonos product located in a bedroom, you may want to turn this light off so that when the unit is in
normal operation it does not display. However, if the status indicator light begins to flash orange, please go to 
http://faq.sonos.com/led for additional information.
From the Settings menu, touch Room Settings. To turn off a BRIDGE status indicator light, touch BRIDGE Settings
1.
instead.
Touch the room you wish to affect.
2.
Touch White Status Light. If the option is set to:
3.
• Off, the status indicator light remains off during normal operation.
• On, the status indicator light remains on during normal operation.

Creating a Stereo Pair

The Stereo Pair setting allows you to group two PLAY:1s, PLAY:3s or PLAY:5s in the same room to create a wider stereo
experience. In this configuration, one component serves as the left channel and the other serves as the right channel. You
cannot create a mixed stereo pair—the Sonos components in the stereo pair must be the same.
Optimum placement information
• When creating a stereo pair, it is best to place the two Sonos components 8 to 10 feet away from each other.
• Your favorite listening position should be 8 to 12 feet from the units. Less distance increases bass, more distance im-
proves stereo imaging.
9