Brother MFC-J875DW Basic User's Manual page 106

Error Message
Failed to detect the
original
(MFC-J870DW and
MFC-J875DW)
High Temperature
Hub is Unusable.
Image Too Long
(MFC-J870DW and
MFC-J875DW)
Image Too Small
(MFC-J870DW and
MFC-J875DW)
92
Cause
The machine failed to detect the
original (disc and photo) when
scanning.
The room temperature is too high.
A hub or USB Flash drive with hub
has been connected to the USB direct
interface.
The proportions of your photo are
irregular so effects could not be
added.
The size of your photo is too small to
trim.
Action
Do one of the following:
 Remove any dirt from the scanner
glass.
 Before scanning, choose the type
of the document (disc or paper).
 While scanning, close the
scanner cover.
 Place only one sheet on the
scanner glass.
 Make sure the document is
placed correctly on the scanner
glass.
After cooling the room, allow the
machine to cool down to room
temperature. Try again later.
Hubs, including a USB Flash drive
that have a hub built in, are not
supported. Unplug the device from
the USB direct interface.
Choose a regularly proportioned
image.
Choose a larger image.