Table of Contents
Advertisement
Setting Up Your MediaBridge
There are four steps to setting up your MediaBridge:
1. Connect the MediaBridge to your Home Entertainment
System.
2. Connect the MediaBridge to your Computer Network.
3. Install the Software on the PCs in your network.
4. Run the MediaBridge Setup Wizard.
1662616C_01.indd 8
Graphics contained within this publication are for representation only.
Step 1: Connect the MediaBridge to
your Home Entertainment System
You will need to make two connections between the MediaBridge
and your entertainment system: one for video and one for audio.
Important: The MediaBridge uses on-screen menus for guiding
your selections, so you need to connect it either directly to a TV or
to a video input on an A/V receiver. It is recommended that you use
Acoustic Research cables for best picture and sound performance.
Video Connection
The MediaBridge works with both High-Definition and
Standard-Definition TVs. How you connect the MediaBridge to
your TV depends upon the type of TV you have.
Note: You must have a High-Definition television or monitor in
order to watch video in High-Definition.
12/14/05 3:56:52 PM
Advertisement
Table of Contents
