Table of Contents
Advertisement
Troubleshooting
i can't hear the audio from my movie.
If the movie you're playing on the MediaBridge has multichannel
audio, audio will only be available from the digital audio outputs.
There will be no audio signal from the MediaBridge's other audio
outputs.
To hear multichannel audio, use one of the MediaBridge's digital
audio outputs to connect it to multichannel-capable receiver.
There's a red exclamation mark next to one of the video or
picture files in my library.
The MediaBridge displays a red exclamation mark next to video
or picture files it has tried unsuccessfully to play.
The red exclamation mark means that the MediaBridge cannot
play that particular file. There are several possible reasons for
this—the file may have a name that the MediaBridge has trouble
recognizing, or the file may be corrupt.
Please note that Windows Media Center Edition PCs use a
proprietary file format for recording, and the MediaBridge cannot
play these files.
1662616C_01.indd 32
Display problems
Only the "ar" (acoustic research) screen appears when i
turn on the MediaBridge. i don't see the main menu.
Make sure the SD/HD switch on the back of the MediaBridge is
set to the right position for the type of connection you're using
between the MediaBridge and your TV or monitor.
If you used the MediaBridge's VIDEO or S-VIDEO output jacks,
set the SD/HD switch to SD.
If you used the MediaBridge's DVI output jack, set the SD/HD
switch to HD.
If you used the MediaBridge's COMPONENT VIDEO jacks, set
the SD/HD switch to match the kind of TV or monitor you have:
SD for a standard-definition monitor or HD for a high-definition
monitor.
12/14/05 3:57:13 PM
Advertisement
Table of Contents
