Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Installation Instructions
GSM1800JBB, Black Trim Kit
GSM1800JWW, White Trim Kit
Before you begin - Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector's use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer.
NOTE TO CONSUMER: Keep these instructions with your Owner's Manual for future reference.
To prevent electric shock, disconnect electrical
power supply to dishwasher before changing
panels. Do not operate dishwasher while
changing panel.
CAUTION
The dishwasher will tip over when the door is opened. Hold the
top of the dishwasher securely with one hand and hold the door
with the other hand.
STEP 1 CUT 1/4" THICK CUSTOM PANEL TO SIZE
Cut door panel to the dimensions shown in Figure 1.
NOTE: The trim provided will conceal the cut edges of the
panel.
Tools and Materials Required:
Phillips screwdriver
Gloves to protect against sharp edges
Safety glasses
The GPF18 trim kits provide for the installation of a 1/4" thick
custom door panel.
This kit includes:
Fully Assembled Door Panel Frame
1/4" Thick
Door Panel
17-1/4"
Figure 1
GPF18
Series Kits
22-1/8"
Advertisement
Related Manuals for GE GSM1800JBB
Summary of Contents for GE GSM1800JBB
-
Page 1: Installation Instructions
Installation Instructions GPF18 GSM1800JBB, Black Trim Kit Series Kits GSM1800JWW, White Trim Kit Before you begin - Read these instructions completely and carefully. IMPORTANT: Save these instructions for local inspector's use. IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES. NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer. - Page 2 STEP 2 REMOVE DOOR PANEL Open dishwasher door. Remove the 6 Phillips head screws along the side of the door (Figure 2) holding the inner door to the outer panel. Retain screws. Remove door panel. NOTE: To prevent any damage, support the outer door panel while removing the screws.
- Page 3 STEP 5 CHECK DOOR BALANCE Increase To check the door balance, hold the top of the dishwasher firmly. Open the door slowly, if the door drops faster than desired when released, increase spring tension. If the door closes too quickly when released, decrease tension. To adjust spring tension: Make sure door is closed Unhook springs from adjustment pins...