Selecting The Video For "Rear Display; Adjusting The Picture - Pioneer AVIC-F200BT Operation Manual

Chapter
26 Customising preferences
Selecting the video for
"Rear display"
You can choose either to show the same
image as the front screen or to show the se-
lected source on the "Rear display".
% Tap
on the left edge of the screen.
p The appearance of this key changes accord-
ing to the current setting.
Each touch of
lows:
! Mirror AV: The video on the front screen of
the navigation unit is output to the "Rear
display"
! DISC: The video and sound of the DVDs are
output to the "Rear display"
! iPod: The video and sound of the iPod are
output to the "Rear display"
! AV1: The video and sound of AV1 are out-
put to the "Rear display"
! AV2: The video and sound of AV2 are out-
put to the "Rear display"
p When "Mirror AV" is selected, the following
restrictions are applied to "Rear display".
— When selecting "Rear View" in the map
display, nothing is displayed.
— All sounds cannot be output for "Rear
display".
— When playing back video files on the ex-
ternal storage device (USB, SD), the
video image is not output.
p When "DISC" is selected, the following re-
striction is applied to "Rear display".
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When "iPod" is selected, the following re-
striction is applied to "Rear display".
— The video image and sound are output
only when the appropriate setting on
"AV1 Input" is "iPod".
p When "AV" is selected, the following re-
strictions are applied to "Rear display".
— The video image and sound are output
only when AV1/AV2 has both video and
sound.
134
Engb
changes the settings as fol-
— The video image and sound are output
only when the appropriate setting on
"AV1 Input" or "AV2 Input" are
"Video".

Adjusting the picture

CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the handbrake. Refer to
Important Information for the user (a separate
manual).
You can adjust the picture for each source and
rear view camera.
1 Press and hold the MODE button.
The "Picture Adjustment" screen appears.
2 Touch [+] or [–] to adjust the desired
item.
! Brightness: Adjusts the black intensity.
! Contrast: Adjusts the contrast.
! Colour: Adjusts the colour saturation.
! Colour Temp.: Adjusts the tone of colour
(red is emphasised or green is empha-
sised).
! Dimmer: Adjusts the brightness of display.
p Touching [Camera] switches to the picture
adjustment screen for the rear view cam-
era.
p Touching [Source] while adjusting the rear
view camera image returns you to the pre-
vious screen.