GEM PTZ722 Installation And Operation Manual page 9

2. P: PROTOCOL (select from 11 different protocols)
This is the language that the dome uses when you are sending messages from the keyboard. The
protocol set in the dome must agree with the protocol set in the keyboard. The protocol used by the
keyboard is set in the keypad menu.
List of Protocols:
PELCOD / PELCOP / SAE / SONIC1 / SONIC2 / SAMSUNG / RULE / B01 / DAHUA / HIK /
VISCA
3. B: BAUD RATE (select from four different baud rates)
This is the speed of the messages sent to the dome. The baud rate set in the keyboard menu must
agree with the baud rate set in the dome.
List of Baud Rates:
2400 / 4800 / 9600 / 19200
9