Enabling The Operating Modes; Rotating The Computer Display - Lenovo ThinkPad Yoga 260 User Manual

Enabling the operating modes

To provide your computer the flexibility of being used in various operating modes, enable the operating
modes first.
For the Windows 7 operating system, do one of the following to enable the operating modes:
• When you enter the Windows 7 operating system for the first time, the Enable sensors window is
displayed. Then click Enable this sensor.
• Go to Control Panel. Click All Control Panel Items ➙ Location and Other Sensors. Then select the
check box for STMicroelectronics Sensor Hub.
For the Windows 10 operating systems, the operating modes are enabled by default.

Rotating the computer display

This topic provides instructions on how to rotate the display of your computer properly. This topic also
provides information on the operating modes of your computer and corresponding display angle ranges.
You can open the computer display to any angle within a range of up to 360 degrees as shown in the
following illustration.
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
Display angle for each operating mode
The angle between the front of the computer display and the keyboard is different in each operating mode.
The following table lists the angle range for each operating mode.
26
ThinkPad Yoga 260 User Guide