Motorola MicroTAC Owner's Manual page 61

Scanning Mode
Preferred SID Mode
Phone will scan for home or programmed
preferred SIDs first. This choice requires
entry of up to 60 System ID numbers for
those systems in which you wish to
operate. Contact your Cellular Service
Provider for SID information.
If you have selected two system operation, the phone seeks
cellular service according to the system type mode
selected for each phone number.
NOTE In order to program Preferred SIDs to be used in
P SCAn mode, press
SYSID) , then press
5-digit SID number (from your Cellular Service Provider),
then press
STO
the system type choices ( HOM<E , rOAM< , or inhibit ).
With the desired system type displayed, press
select that choice. To program another Preferred SID, press
and repeat the above process, or press
Preferred SIDs programming.
Programming Scanning Modes
,
7
,
FCN FCN
. Now press
, ,
9 7 4
and enter the appropriate
or to cycle through
Display
P SCAn
, (spells
3
to
STO
to exit
END
47