Lift battery up and out, using
tilting movements if it is difficult
to move.
Installing battery
Place battery in battery com-
partment, positive terminal on
right in direction of travel.
Hook in retaining hoop at bot-
tom, push over battery and in-
stall screw 3.
An incorrect installation se-
quence increases the risk
of short-circuiting.
Always observe the proper se-
quence.
Never install the battery without
the protective cap.
First install positive battery ca-
ble 1 and mount protective
cap.
Then install the negative bat-
tery cable 2.
If the motorcycle was dis-
connected from the bat-
tery for a longer time, the current
date must be entered in the in-
strument cluster to ensure the
proper operation of the service
display.
Consult a certified workshop,
preferably an authorized BMW
Motorrad retailer, for setting of
the date.
Slide holder under tank cover
and install screws 1.
Insert Rider's Manual if neces-
sary.
Installing driver's seat (
Setting clock (
42).
8
125
z
61).