BMW 2012 R 1200 GS Rider's Manual page 112

tion arrows on the tires or on the
8
rim.
Roll front wheel into front
110
wheel guide.
z
Lift front wheel and install
quick-release axle 3 with
appropriate torque.
Quick-release axle in axle
mount
37 lb/ft (50 Nm)
Tighten axle clamping screw 2
with appropriate torque.
Clamping screw (quick-
release axle) in slider
tube
14 lb/ft (19 Nm)
with BMW Motorrad Integral
OE
ABS Generation II
Insert ABS sensor into hole
and install screw 1.
Remove front wheel stand.
Ease brake calipers onto brake
disks.
Install securing screws 2 on left
and right with specified torque.
Brake caliper on slider
tube
22 lb/ft (30 Nm)
Remove adhesive tape from
wheel rim.
Braking efficiency is im-
paired if the brake pads are
not correctly bedded against the
disks.
Before driving off, check that the
braking effect kicks in without
any delay.