Pioneer MVH-X385BT Owner's Manual page 11

Menu Item Description
GUEST MODE Select [ON] to move to the [DEL DEVICE] screen
automatically when the unit has already been paired
[ON], [OFF]
with three devices.
A.PAIRING* Select [ON] to pair the unit and iPhone automatically
when an iPhone is connected to the unit via USB. (This
[ON], [OFF]
function may not be available depending on the version
of iOS you are using.)
* [A.PAIRING] is not available for MVH-285BT.
Bluetooth telephone
First, make a Bluetooth connection with the Bluetooth telephone (page 10).
Up to two Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is
not running can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
2
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then
press to confirm.
4
Turn the M.C. dial to select a name or phone number, then press to
confirm.
The phone call starts.
To answer an incoming call
1
Press
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
Purpose
End a call
Reject an incoming call
Switch between the current
caller and a caller on hold
Cancel a caller on hold
Adjust the volume of the
caller's voice (When private
mode is on, this function is not
available.)
Turn the privacy mode on or
off
again.
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
to 6/ ), then press the M.C. dial.
Voice recognition (Only for iPhone)
(Not available for MVH-285BT)
when a call is received.
Operation
Press .
Press and hold
Press the M.C. dial.
Press and hold
Turn the M.C. dial during the call.
Press BAND/ or BAND/
when a call is received.
.
during the call.
to 6/ ).
11
En