Table of Contents
Advertisement
Advanced Calling Features
Choose Your Hearing Aid Setting
From the main menu, select Settings > Phone
Calls > Hearing Aid.
Set this option to Microphone. Microphone
coupling is now optimized. -or-
Set this option to Telecoil. Handset meets US
federal requirements for telecoil coupling sound.
-or-
Set this option to Off (factory default). This is the
setting for non HA users.
Using Your Phone With a
Teletypewriter (TTY) Device:
Connect one end of a 2.5mm cable into the stereo
headset jack on your phone. Connect the other
end of the cable to your TTY device.
4 Make sure that your phone's TTY feature is on
and select the TTY mode you want to use.
5 Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone's display:
Phone call is active.
N
Phone call is on hold.
O
84
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
Turning On the TTY Feature
Your phone's TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a TTY Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
device.
• VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
To change mode while not in a call:
1 From the main menu, select Settings > Phone
Calls > TTY > Type.
2 Select the TTY mode you want.
Advertisement
Table of Contents
