Olympus Stylus 1050 SW Instruction Manual page 39

Make the settings for the functions while referring to "Using the Menu" (p. 3).
Rotating images [y]
q PLAYBACK MENU  y
Submenu 2
The image is rotated 90°
U +90°
clockwise.
V 0° The image is not rotated.
The image is rotated 90°
t –90°
counter-clockwise.
1 Use 34 to select an image.
2 Use 12 to select the rotation direction.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the o button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
q PLAYBACK MENU  R
Submenu 2
The camera adds (records) sound
for approx. 4 seconds while
YES playing back the image. This
is useful for recording notes or
comments about the image.
NO No sound is recorded.
1 Use 34 to select an image.
2 Aim the microphone towards the sound
source.
Microphone
3 Use 12 to select [YES], and press the
o button.
●
Recording starts.
Application
Application
Erasing images [D ERASE]
D ERASE
Check each picture before erasing to avoid
erasing any important pictures you may
want to keep.
Submenu 1
Images are individually selected
SEL. IMAGE
and erased.
All images in the internal memory
ALL ERASE
or card are erased.
To individually select and erase
images [SEL. IMAGE]
1 Use 12 to select [SEL. IMAGE], and
press the o button.
2 Use 1234 to select the image to be
erased, and press the o button to add a
R mark to the image.
SEL. IMAGE
R mark
BACK
3 Repeat Step 2 to select the images to be
erased, and then press the D button to
erase the selected images.
4 Use 12 to select [YES], and press the
o button.
●
The images with a R mark are erased.
To erase all images [ALL ERASE]
1 Use 12 to select [ALL ERASE], and
press the o button.
2 Use 12 to select [YES], and press the
o button.
Application
IN
1 2 3
4 5 6
OK GO

MENU
EN