Motorola i776 User Manual page 112

to the Contacts list or press P to return to standby
mode.
To create a Contacts entry:
Press M
1.
> Contacts > [New Contact]
– or –
Press M
> Contacts >
2.
If you want to assign a name to the entry:
Select Name . Enter the name. When you are
finished, press r.
3.
If you want to assign a ring tone to the name:
Select . Select the ring tone you want to
Ringer
assign.
4.
To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
( , ,
Mobile DC Work1
,
Talkgroup Group
100 Section 2E. Contacts
.
M
> New Contact .
, , , ,
Work2 Home Email Fax
, , or .)
IP Other
5. To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
Enter the number or address. For phone
numbers, use the ten-digit format. For Direct
Connect numbers, be sure to include the
asterisks (*).
For email addresses, see "Entering Text" on
page 21.
When you are finished, press r.
6. If you want to assign more options to the number,
including
and proceed to steps 7-9. Otherwise, skip to
step 10.
7.
The default Speed Dial number assigned to a
phone number is displayed in the
This is always the next available Speed Dial
location. If you want to assign the phone number
to a different Speed Dial location:
, ,
Pager
With the
Press
Speed Dial number.
and
Speed # Voice Name
field highlighted, press r.
Speed #
Delete (right softkey) to delete the current
, select
[Options]
field.
Speed #