Table of Contents
Advertisement
Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time.
Note: The preferred connection to your phone is
a wired audio device. If you insert a wired
headset into the stereo headset jack on
your phone, audio will be routed to the
wired headset and you will lose your
Bluetooth headset connection.
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -or-
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Using a Bluetooth Headset
You can use your i615 wirelessly with a Bluetooth
headset. This type of wireless headset lets you
connect quickly to devices that are within range.
For more information, refer to your Bluetooth
headset's user guide.
Attaching a Headset
1 Lift the stereo headset jack cover.
2 Insert the headset connector firmly into the
stereo headset jack. You may have to rotate the
headset connector until it fits securely into the
stereo headset jack.
Tip: For optimum performance, the headset
should be worn on the same side of your
body as the phone.
Using a Remote Walkie-Talkie
Button
If you are using a headset or other accessory with
a remote Walkie-Talkie button, you can use the
remote Walkie-Talkie button for phone calls,
Walkie-Talkie calls, and Group Walkie-Talkie calls.
For phone calls, use the remote Walkie-Talkie
button to answer calls, switch between calls, and
end calls. Hold the remote Walkie-Talkie button for
less than 2 seconds to answer calls and switch
between calls. Hold the remote Walkie-Talkie
button for more than 2 seconds to end calls.
For Walkie-Talkie calls and Group Walkie-Talkie
calls, use the remote Walkie-Talkie button as you
would the Walkie-Talkie button on your phone.
161
Advertisement
Table of Contents
