KTM 2010 1190 RC8 R EU/UK Owner's Manual page 177

MAINTENANCE WORK ON FRAME AND ENGINE
Loss of a black ignition key (second black ignition key available):
If a black ignition key is lost or replaced, the black ignition keys must be individually
activated/deactivated using the orange programming key. This will also prevent the vehi-
cle from being operated without authorization with the lost black ignition key.
The following procedure deactivates all activated black ignition keys that are not
included in the procedure.
–
Press the emergency OFF switch into the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
100749-01
EFI warning lamp
The immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black programming key to the position ON
EFI warning lamp
The immobilizer indicator lamp
on again.
–
Switch off the ignition by turning the black programming key to the position OFF
–
Remove the black ignition key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
The immobilizer indicator lamp
according to the number of functioning black ignition keys including the orange
programming key. In this case, twice.
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and switches
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and flashes
175
.
.
.
.
.