Table of Contents
Advertisement
MPEG (DVD VIDEO/DVD-VR mode only)
Selects the type of MPEG audio signal.
PCM
MPEG
Note
If the HDMI OUT jack is connected to equipment
not compatible with MPEG audio signal, the
"PCM" signals will be automatically output even
when you select "MPEG."
DTS
Select the type of DTS audio signals.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
DTS
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
Note
If the HDMI OUT jack is connected to equipment
not compatible with DTS signals, the "D-PCM"
signals will be automatically output even when you
select "DTS."
78
Select this when the player is
connected to an audio
component without a built-in
MPEG decoder. If you play
multi-channel MPEG audio
sound tracks, only the Front (L)
and Front (R) signals will be
output from your two front
speakers.
Select this when the player is
connected to an audio
component with a built-in
MPEG decoder.
48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
Notes
• The analogue audio signals from the LINE OUT
L/R (AUDIO) jacks and 5.1CH OUTPUT jacks
are not affected by this setting and keep their
original sampling frequency level.
• If the HDMI OUT jack is connected to equipment
not compatible with 96 kHz/24 bit signals,
48 kHz/16 bit PCM will be automatically output
even when you select "96kHz/24bit."
Advertisement
Table of Contents
