Table of Contents
Advertisement
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
YC
C
/RGB (HDMI):
B
R
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 73)
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 73)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an
amplifier (receiver)? Select the type
of jack you are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
19.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 19.
If you connected an AV amplifier
(receiver) using a digital coaxial or
optical/HDMI cord, select "YES:
DIGITAL OUTPUT."
24
4:3 LETTER BOX
4:3 PAN SCAN
JACKET PICTURE
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
Setup Display for "DOLBY DIGITAL"
appears.
If you connected an AV amplifier
(receiver) using an audio cord, select
"YES: DIGITAL & 5.1CH OUTPUT."
The Setup Display for "DOLBY
16:9
DIGITAL" appears.
16:9
10
Press X/x to select the type of
ON
Dolby Digital signal you wish to
FULL
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
11
Press ENTER.
"DTS" is selected.
To set, press
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "DTS." Otherwise,
select "D-PCM."
13
Press ENTER.
in step 9
• Quick Setup is finished and
• If your AV amplifier (receiver) has an
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
, then
When "DIGITAL OUTPUT" is selected
connections are complete.
MPEG audio decoder, set "MPEG" to
"MPEG" (page 78).
OFF
STANDARD
SHARP
ON
D-PCM
D-PCM
DOLBY DIGITAL
48kHz/16bit
OFF
STANDARD
SHARP
ON
D-PCM
DTS
D-PCM
48kHz/16 bit
.
Advertisement
Table of Contents
