Download Print this page

Honeywell 2208 Owner's Manual page 2

Digital steel fire & security safe

Advertisement

SETUP & OPERATION
STEP 1: INSTALL BATTERIES
For your convenience, we have included 4 "AA" Batteries that provide the
power for the electronic controls. These must be installed before using your
safe.
1. The battery compartment is located
behind the dark gray panel under the
keypad. To gain access, slide the
panel to the left and lift off.
2. Install the 4 "AA" batteries in the
battery compartment as illustrated on
the inside of the compartment.
3. Re-install battery compartment cover.
REPLACING BATTERIES
NOTE: The pass code will not be erased if the batteries become weak or are removed.
Weak or dead batteries should be replaced immediately and all 4 batteries should be
changed. To replace the batteries please follow the instructions in STEP 2. in the
"SETUP" section. Remember to always remove batteries from safe if not using for an
extended period of time. If your batteries are completely dead and you cannot open
the safe by using the digital keypad, use the override access key to open safe and
access the battery compartment.
NOTE: It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries.
1.
2.
SETUP & OPERATION
STEP 2: UNLOCK AND OPEN THE SAFE
Your safe includes 2 Entry keys
and 1 Emergency Access key,.
1. On the keypad, press
"ENTER" then "7 7 7 7" then
"ENTER" again. If the correct
code has been entered, a
musical code will chime and
the lock will click open.
2. Insert the "Entry Key" and
turn all the way to the right
(clockwise). Rotate the
handle upwards and pull the
door open.
TO LOCK THE SAFE:
Carefully close the door and rotate the handle downwards. Now turn the
key all the way to the left and remove from the safe. The safe is now in
locked position. The Entry key and security code will be needed to open.
OVERRIDE ACCESS KEY
If you have forgotten your personal access code or the electronic lock is not
functioning properly, you can use the Emergency Override Key to gain access.
Insert the Emergency Access key
into the lock, turn all the way to
the left (counterclockwise), and lift
handle to open safe.
1.
2.

Advertisement

loading