Motorola E360 User Manual page 142

Using Your Phone's Menus
Off
Passwords
This option allows you to set and change the following
passwords that you can use on your phone.
Unlock Code
This option is used to set the unlock code, which is used to
prevent unauthorized use of your phone.
1 Select the
2 When prompted, enter the
enter this code before you can proceed.)
3 When prompted, enter the
4 When prompted to
code again.
After you complete this step, your unlock code is set. (See
also "Unlock Code" on page 138.)
Security Code
The security code is used to control access to security and other
options within the menus.
Note: In order to safeguard your phone, you should change your
security code from the factory setting as soon as possible. This
code is set at manufacture to 000000.
When selected, the phone will not ask you for
the SIM PIN when switched on.
Note: Some SIM cards do not allow turning
off this feature.
Unlock Code
option.
Re-enter New Code
Old Unlock Code
New Unlock Code
, enter the new
. (You must
.
141