Operations; Control Panel - Samsung WD90J6 series User Manual

Operations

Control panel

01 Course
Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Dry Level
07 Bubble Soak
08 Options
WD80J6410AX-DC68-03591A-03_EN.indd 31
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the rinse times for the current course.
You can set the rinse times up to 5.
Press to change the spinning speed for the current cycle.
• Rinse Hold : The final rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain or
spin process.
• No Spin : The drum does not spin after the final drain process.
Press this button to select proper drying option.
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in water
bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes (or 20
minutes) to 3 cycles: Cotton, Synthetics, and Baby Care.
Press to select an Option from Intensive(
Intensive( )+Prewash(
02
03 04 05 06
), Prewash(
). Press again to deselect.
09
10
08
07
11
), and
English 31
2015/12/3 14:38:30