Input Sensitivity Controls - JL Audio M400/4-24V Owner's Manual

INPUT SENSITIVITY CONTROLS

The controls labeled "Input Sens." located in
each channel section can be used to match the
source unit's output voltage to the input stage of
each pair of amplifier channels for maximum
clean output. Rotating the control clockwise will
result in higher sensitivity (louder for a given
input voltage). Rotating the control counter-
clockwise will result in lower sensitivity (quieter
for a given input voltage.)
To properly set the amplifier for maximum
clean output, please refer to Appendix A (page
14) in this manual. After using this procedure,
you can then adjust any or all "Input Sens."
levels downward if this is required to achieve the
desired system balance.
Do not increase any "Input Sens." setting for
any channel(s) of any amplifier in the system
beyond the maximum level established during
the procedure outlined in Appendix A (page 14).
Doing so will result in audible distortion and
possible speaker damage.
7