Battery Installation & Charging - AT&T TL76008 User Manual

Getting started
Handset battery installation & charging
Install the battery as shown below. After installing the battery,
you can make and receive short calls, but replace the handset
in the telephone base or charger when the handset is not being
used. For optimal performance, charge the handset battery for
at least 16 hours before use. When fully charged, the handset
battery provides up to approximately eight hours of talk time or
four days of standby time.
Step 1
Press the tab and
slide the battery
compartment
cover downwards.
Step 2
Insert the supplied
battery as indicated.
Insert the top (on
contacts and tab)
in first, then push
downwards on the
lower portion of the
battery.
6
Step 3
Align the cover flat
against the battery
compartment, then
slide it upwards
until it clicks into
place.