AT&T TL76008 User Manual page 40

Appendix G
Troubleshooting
System does
not receive
caller ID when
on a call.
Common cure
for electronic
equipment.
• Make sure you subscribe to caller ID with
call waiting features services provided by
your local telephone company. Caller ID
features will work only if both you and the
caller are in areas offering caller ID service,
and if both telephone companies use
compatible equipment.
If the unit does not seem to be responding
normally, try putting the cordless handset in
its base. If it does not seem to respond, do the
following (in the order listed):
• Disconnect the power to the telephone
base.
• Disconnect the cordless handset battery,
and spare battery, if applicable.
• Wait a few minutes.
• Connect power to the telephone base.
• Re-install the battery, and place the
cordless handset into the telephone base.
• Wait for the cordless handset to re-establish
its connection with the telephone base.
Allow up to one minute for this to take
place.
37