Behringer tube ultragain mic200 User Manual page 4

4
TUBE ULTRAGAIN MIC200 User Manual
Do not block any ventilation
7.
openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources
8.
such as radiators, heat registers, stoves,
or other apparatus (including amplifi ers)
that produce heat.
Do not defeat the safety purpose of
9.
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding-
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fi t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being
10.
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
Use only attachments/accessories
11.
specifi ed by the manufacturer.
12.
cart, stand, tripod,
bracket, or table specifi ed
by the manufacturer,
or sold with the apparatus. When a cart
is used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during
13.
lightning storms or when unused for
long periods of time.
Refer all servicing to qualifi ed
14.
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
The apparatus shall be connected to
15.
a MAINS socket outlet with a protective
earthing connection.
Where the MAINS plug or an
16.
appliance coupler is used as the
disconnect device, the disconnect device
shall remain readily operable.
Use only with the