Call Barring - Motorola cd 160 Quick Reference

Motorola cellular telephone owner manual
Hide thumbs Also See for cd 160:
Table of Contents

Advertisement

cd160.bk : clrltd.fm5 Page 33 Monday, January 19, 1998 10:32 AM
Talk and Fax
This is a network feature that allows you to speak and then send
or receive a fax during the course of a single call.
Your phone supports a data and fax transmission speed of up
A
to 9600 bps.
Before making a Talk and Fax call, ensure that:
• Your phone is "fax-ready" (it has been switched off,
connected to the fax, then switched back on). Connecting
your phone to the fax in the middle of the call will not work.
• The Talk and Fax mode is set to On.
A Talk and Fax call automatically switches to fax mode when you
start sending the fax. While the fax is being transmitted, the
message Fax in progress will be displayed. The call
automatically ends when the fax transmission is complete. You
cannot switch back to voice mode in the same call.
While a Talk and Fax call is active, incoming call services like
A
Call Waiting and Call Holding are suspended.
If you receive a Talk and Fax call when:
• Your phone is not fax-ready - you can only talk.
• Your phone is fax-ready but Talk and Fax mode is off - the call
is automatically routed to your fax (you cannot talk).
On
Switches Talk and Fax mode on for the next and all subsequent
calls.
Off
Switches Talk and Fax mode off for the next and all subsequent
calls.
Call Holding and Call Waiting
Using these options you can place a current phone call on hold
and accept an incoming call or start a second call.
If Call Waiting is On, you will be notified of a waiting call by an
audible alert and by the message Call Waiting - Answer? .
You can press the O key to accept the waiting call, or use the M
key to scroll to an alternative option and then press O.
If you have Caller Line Identification, the caller's number or
A
name is displayed instead of the Call Waiting message.

Call Barring

This is a network feature which can be used to selectively bar
outgoing and incoming calls.
If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.
The initial password will be supplied to you by your Cellular
Service Provider when you subscribe to this service.
This option may be affected by the Call Diverting or Fixed
A
Dialling settings.
Using The Options Menu
33
English

Advertisement

Table of Contents
loading

Table of Contents