Sony KP-48V45 Operating Instructions Manual page 19

4
Press V or v to select CHANNEL ERASE/ADD,
and press .
The CHANNEL ERASE/ADD menu appears.
5
Erase and/or add channels:
To erase an unwanted channel
(1) Make sure the cursor (z) is beside ERASE.
(2) Press CH +/– or the 0 – 9 buttons to select the
channel you want to erase, and press ENTER.
CH
1 2
or
4 5
7 8
0
(3) Press .
The "–" indication appears beside the channel
number, showing that the channel is erased
from the preset memory.
To add a channel that you want
(1) Press V or v to move the cursor (z) to ADD.
(2) Press the 0 – 9 buttons to select the channel you
want to add, and press ENTER.
1 2 3
4 5 6
7 8 9
ENTER
0
(3) Press .
The "+" indication appears beside the channel
number, showing that the channel is added to
the preset memory.
CHANNEL ERASE/ADD
ERASE
ADD
MENU
Use [ 0 – 9 ]or [ CH +/–]
to select the channel.
Use Exit
MENU
Selected channel number
3
CHANNEL ERASE/ADD
ERASE
6
ADD
MENU
9
Use [ 0 – 9 ]or [ CH +/–]
ENTER
to select the channel.
Use Exit
Selected channel number
CHANNEL ERASE/ADD
ERASE
ADD
MENU
Use Exit
MENU
6
To erase and/or add other channels, repeat
step 5.
7
Press MENU to return to the original screen.
33
Notes
• If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
• Erasing and adding channels is also available for the AUX
input.
33
Adjusting convergence
(CONVERGENCE)
The projection tube image appears on the screen in
MENU
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you perform
AUTO SET UP (page 17). Do this procedure only
when you want to adjust it manually.
1
Press MENU.
2
Press V or v to select
3
Press V or v to select CONVERGENCE, and
press .
The CONVERGENCE adjustment screen appears.
33
MENU
, and press .
R
CONVERGENCE
G
+
RED
+
BLUE
B
MENU
B
Us e RETURN E x
G
R
R=Red
G=Green
B=Blue
19
Getting Started
EN
i t MENU
-EN