Updating using a USB flash drive
08
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive. Carefully read the instructions on
downloading update files provided on the Pioneer
website.
• Store the update file in the root directory of the USB
flash drive. Do not store it within a folder.
• Do not put any files other than the update file on the
USB flash drive.
• This unit supports USB flash drives formatted in
FAT32, FAT16 or NTFS. When formatting a USB flash
drive on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
flash drive.
• Do not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension cable
may prevent the player from performing correctly.
1
Plug in the USB flash drive on which the update
file is stored.
2
When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
3
Select and set Initial Setup.
Use / to select, then press ENTER.
Select and set Options Update USB Storage
4
Start.
Use / to select, then press ENTER.
5
Updating starts.
Press ENTER.
• Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
46
En
Restoring all the settings to
the factory default settings
1
Check that the player's power is turned on.
2
When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
3
Select and set Initial Setup.
Use / to select, then press ENTER.
Select and set Options Load Default Next
4
Screen.
Use / to select, then press ENTER.
5
Select and set OK.
Use / to select, then press ENTER.
Note
• After restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
(page 20).
• When disposing of the product, we recommend you
reset it to the factory default setting to delete the data.