Playback; Playing Discs Or Files; Quick View (Quick View With Audio); Slow-View Play (Slow Play With Audio) - Pioneer BDP-180 Operating Instructions Manual

Chapter 4
04

Playback

Playing discs or files

This section describes the player's main operations.
For the types of discs and files that can be played, see
page 7. Video, image and audio files recorded on discs
are played with the Source function (page 31).
1 Press  STANDBY/ON to turn on the power.
Turn the TV's power on and switch its input beforehand.
2 Press  OPEN/CLOSE to open the disc tray and
load the disc.
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player's front panel display.
• When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
3 Press  to play the disc.
• To pause, press  during playback.
• To stop, press  STOP during playback.
Note
• Some discs start playing automatically when the disc
tray is closed.
• BD-ROM/DVD-Video discs have parental lock
features. Input the password registered in the player's
settings to unlock the parental lock. For details, see
page 42.
• Some BD-R/-RE discs have playback protection. To
cancel the protection, input the password set for the
disc.
• If the picture and sound are not properly output,
Troubleshooting
 If the disc menu is displayed
For some discs, the disc menu is displayed automatically
when playback starts. The contents of the disc menu and
the way to operate depend on the disc.
 Resuming playback from where it
was stopped (resume playback
function)
• When  STOP is pressed during playback, the point
at which the disc stopped is stored in the memory.
When  is pressed after that, playback resumes
from that point.
• To cancel the resume playback function, press
22
 STOP while playback is stopped.
En
on page 50.
Note
• The resume playback function is canceled
automatically in the following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs
this does not cancel the resume playback
function.)
– When it entered the Miracast / Wi-Fi Direct Mode
screen. (page 34)
• When you want to continue playback from a position
you specify to be played next time, see
specified range of discs, titles or chapter (track/file) in
random order
on page 29.
• The resume playback function cannot be used for
some discs.
Quick view (Quick view with
audio)
Audio is being output while the video images are played
back at about 1.5 times the normal speed.

Press  while playing back BD or DVD.
• If  is pressed during quick playback, it will switch
to fast forward.
 To return to normal playback
• Press .
Note
• You cannot pause during quick playback. Please
pause after returning to normal playback.
• As for the tone during quick playback, the output
comes via PCM regardless of the configuration of the
main body of the device.
• It is not possible to switch the audio during quick
playback.
• Depending on the audio format, such as Dolby
TrueHD and DTS-HD Master Audio,there might be no
sound output during fast-forward.
• For the output conditions of each voice, please refer
About how digital audio formats are output
to
page 47.
Slow-view play (Slow play
with audio)
Audio is being output while the video images are played
back at about 0.8 times the normal speed.
Playing
on