Removing The Optical Drive (3.5-Inch); Installing The Optical Drive (3.5-Inch); Installing The Optional Ssd Card - Dell OptiPlex 5040 Series Owner's Manual

Hide thumbs Also See for OptiPlex 5040 Series:
Table of Contents

Advertisement

Removing the optical drive (3.5-inch)

1.
Follow the procedure in
2.
Remove the:
cover
bezel
3.
To remove the optical drive:
a. Disconnect the data cable and power cable from the connectors on the optical drive [1, 2].
b. Press the blue release tab [3] and slide the optical drive out of the optical drive bay [4].

Installing the optical drive (3.5-inch)

1.
Insert the optical drive into the optical drive bay until it clicks into place.
2.
Connect the data cable and power cable to the connectors on the optical drive.
3.
Install the:
bezel
cover
4.
Follow the procedure in

Installing the optional SSD card

1.
Remove the:
cover
bezel
2.
Open the
front bezel
3.
Peel the adhesive tape (blue) from the rubber.
Before Working Inside Your
After Working Inside Your
door.
Computer.
Computer.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents