Removing And Reinstalling The Bottom Plate - Simplicity Freedom S10CV Owner's Manual

Removing and Reinstalling the
Bottom Plate
WARNING! To Reduce the Risk of Electrical
Shock or Injury from Moving Parts, Turn the
Vacuum Off and Unplug the Charger from the
Charge Point Before Servicing or Cleaning
the Vacuum.
To Remove the Bottom Plate:
• Make sure the vacuum is turned Off.
• Remove the battery (see Removing and
Reinstalling the Battery, page 10).
• Press the handle release pedal to place the
vacuum cleaner in the flat position.
• Turn the vacuum cleaner over, exposing the
bottom plate.
• Turn the two screws a quarter turn to release the
bottom plate (Fig. 1). Remove the bottom plate.
• To reinstall the bottom plate: Align the front edge
of the bottom plate into the notches inside the
nozzle (Fig. 2).
• Press the bottom plate into position until the
plate "clicks" on both sides. Tighten the two
screws a quarter turn to secure the bottom plate.
• Replace the Battery (see see Removing and
Reinstalling the Battery, page 10).
MAIntenAnCe AnD CARe
11
Fig. 1
Fig. 2