Example 2 - 3Com 1000 User Manual

5-6 C 5: A
HAPTER DVANCED

Example 2

The example shown in
VLANs spanning two Switch 1000 units. VLAN 1 is
able to talk to VLAN 2 using the connection
between each VLAN and the router. Ports within the
same VLAN but on different Switches communicate
using the VLT.
To set up this configuration:
Use the VT100 screens or VLAN Server database to:
1
Place ports 1–6 and 13–18 of both Switch units
a
in VLAN 1.
Place ports 7–12 and 19–24 of both Switch units
b
in VLAN 2.
Connect port 26 of the higher Switch to Server 1.
2
Connect port 26 of the lower Switch to Server 2.
3
Use the VT100 screens or VLAN Server database to:
4
Place port 26 of the higher Switch in VLAN 2.
a
b Place port 26 of the lower Switch in VLAN 1.
Connect a port on the higher Switch to a port in
5
the lower Switch.
Use the VT100 screens to specify that the
6
Switch-to-Switch port on the higher Switch is a
backbone port and a VLT port.
Use the VT100 screens to specify that the
7
Switch-to-Switch port on the lower Switch is a VLT
port.
M
ANAGEMENT
Figure 5-6 illustrates two
Figure 5-6 VLAN configuration with two Switch 1000 units
8 Connect a VLAN 1 port on the lower Switch to the
router.
Connect a VLAN 2 port on the lower Switch to the
9
router.