NEC univerge sv7000 User Manual page 86

To program a hook switch for transfer or feature activa-
TIP
tion, press Recall
LCD.)
To program a pause, press the
TIP
digit other than the first digit. (– displays on LCD.)
To program a Voice Call, press
TIP
ing station number. (V displays on LCD.)
One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a fea-
ture key by storing the feature access code. The fea-
tures may be programmed on a system basis by the
TIP
Telephony Server Administrator.
Access codes may be stored in conjunction with tele-
phone numbers. For example, one button can be pro-
grammed by the user to transfer to a certain extension.
• TO REGISTER NAME ONTO ONE-TOUCH
SPEED CALLING KEY
Press NAME soft key.
Push Speed Calling Key
1:25 PM TUE 18 MAR 2008
NAME
Press a desired One-Touch Speed Calling key.
key as first digit. (! displays on
Recall key as any
key
after dial-
Transfer
>>>
SPD
^
←
For the key to which no name information is registered,
TIP
the character "SPD" will be displayed.
Enter desired name on the keypad. Display indi-
cates the name entered.
NEC BNET
←
Press >>> soft key twice to display the following
soft keys.
NEC BNET
SET
CLEAR
Press SET soft key to save the entered name.
1:25 PM
NAME
Name information displayed on the One-Touch
Speed Calling key changes as follows:
81
→
BK >>>
^
→
BK >>>
^
CANCEL >>>
TUE 18 MAR 2008
>>>
NEC BNET