NEC univerge sv7000 User Manual page 68

STEP 21:After the data backup is complete, the display
changes as follows:
Upload Complete!
Press Exit to Reset.
STEP 22:Reset the DT750 by pressing Exit soft key.
When the data backup ends in failure, "Upload Failed!"
Note
is displayed on the LCD. Check to see the following and
then make a retry.
Check Points
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
The power to FTP/TFTP
server or network
equipment is OFF.
LAN cable is disconnected.
Exit
Actions
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.
63