TOYOTA
RAV4
PROCEDURE
Side Cutters
Issue C : 04/11/13
w/Smart Key
2013–
REMOTE ENGINE STARTER (RES)
Fig. 4-13
4
5
Fig. 4-14
Fig. 4-15
Page 15 of 26
TVIP V4
n. Secure the V4 Harness to
the Vehicle Harness using
1 Wire Tie.
NOTE: Make sure not to secure
to the Hood Latch Cable.
o. Secure the V4 Harness to
the Vehicle Harness using
1 Wire Tie.
p. Disconnect the Vehicle's 12P
White Connector from the
Connector Block in the DS
Cowl Area.
q. Connect the V4 12P White
Connector to the Vehicle's
Connector Block.